Description
16 Inch Disc Hiller, 4 Hole with 22 Inch Shank for Furrowers & Hillers
With our 16 Inch Disc Hiller, 4 Hole with 22 Inch Shank You Can Build Your Own Disc Hiller & Furrower!
Also Referred to as a Row Hipper
Part# 72H31752 16 Inch Disc Hiller has a 1 1/8″ Shank Diameter
Just add the 16 Inch Disc Hiller to a Part# HT02-04-L4 2 x 2 Toolbar with our Part# R22Wood 1 3/8″ Round Shank Clamps and Voila! You can angle the 16 Inch Hillers, Move them closer or further apart and heighten or lower them. It’s all about versatility!
16 Inch Disc Hiller Setup Suggestion:
Part# R22Wood (Sold Separately)
Part# HT02-04-L4 2 x 2 Toolbar with our Part# Cat I 2×2 3 Pt. Hitch (Sold Separately)
Pictured Above: Part# Cat I 2×2 3 Pt. Hitch with a Part# HT02-04-L4 2 x 2 Toolbar with our Part# R22Wood 1 3/8″ Round Shank Clamps (Sold Separately)
Tools Needed:
1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar
9/16” Wrench to tighten up the Disc Hillers in the Disc Hiller Clamp
With Just 1 Hitch and a Toolbar, You Can Build Many Implements!
Heavy Duty – Up to 85 HP
Includes Pins
- Cat I Hitch Pins: Diameter .750″
- Useable Length 2.750″
- Overall Length 4.500″
WUNDERBAR 3 PT. HITCH DIMENSIONS:
17″ from Top Pin to Lower Pin
Upper Link is 3/4″
Lower Links are 7/8″
Pin to Pin – Center to Center – 26″-28
Spacer Bars, Toolbars & Attachments Sold Separately
Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps
Wunderbar Potato Plow Bundle w/ Wunderbar Cat I Hitch
Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower
By using 2 “Spacer Bars” to the Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More!
Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps
Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function
Part #HT02-04-L4 Toolbar Sold Separately
One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!
Tools Needed:
1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch
1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar
9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp
5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp
¾” Wrench to snug up Flat Shank Foot Pieces
(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece
9/16” Wrench to snug up the bolts to Foot Piece and Furrower
Snug up Elliptical Bolts on S-Tines with 9/16” wrench
3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar
11/16” wrench to snug up the bolts on the S-Tine Clamps
Wowsers! Above is a pic submitted by David Mastin of New York.
Showing our CAT I 3 Pt. Hitch, 18″ Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes.
David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!
Click Here for Sample Wunderbar Configurations
Customer writes: “I just wanted to let you know how impressed I am with your Wunderbar. I purchased the Disc Hiller & Potato Plow and they both worked GREAT. I can’t believe how sturdy everything is and your pricing can’t be beat. You can bet I’ll be back for more “toys”.” Thanks, Andy Parker
