B91-92B Cole Planet Jr. Seeder for 3 Pt. or Tool Bar Mounting
Cole Planet Juniors are USA Made! Not an Imported KnockOff! The Cole Planters are manufactured at their factory in Georgia. Be assured you will get a USA planter with full back up support for parts and service.
- Meters hard-to-handle seeds in continuous drill.
- Very useful – Although we recommend the Jang JPH-U Seeder for smaller seeds.
- Power from the front wheel turns the feed wheel in the hopper assuring constant flow of seeds.
- Seeds pass through a hole in the seed plate. the diameter size of the hole controls the amount of seed flow.
- Three seed plates with 13 holes each come with every drill. This gives you a total of 39 seed flow adjustments ranging in diameter from 3/32″ to 3/4″. Holes are numbered for easy selection. No calibration is necessary between drills. Seed plates change easily without fitted tools.
The individual Planet Jr. plate #s from smallest to largest are:
4″ of Float: Cradle bracket allows the drill to float a full 4″ up and down. Unique spring suspension permits each drill to follow the contours of the ground independently allowing uniform depth of seed.
The following are the Drill Shoes Available for the Cole Planet Junior Planters:
BOK-712 Shallow general purpose shoe – Narrow – 0 to 1-1/2″
BOK-812 Deep general purpose shoe – Narrow – 1 to 2-1/2″
BOK-762 Shallow upland shoe/hard soil – Narrow – 0 to 1-1/4″
BOK-783 2″ scatter shoe – 2″ Wide – 0 to 1-1/2″
BOK-769 4″ scatter shoe – 4″ Wide – 1 to 2-1/2″
BOK-798 Deep Upland Shoe is for Planting 1″- 1 1/2″ Deep in Hard Soils
B91-92B Cole Planet Jr. Pictured with 3 Pt. Hitch
Pictured Above – Model B91-92B Cole Planet Jr. Seeder With Floating Cradle Bracket and 3 Pt. Hitch Part# B21-305A A-Frame Hitch (Sold Separately)
Model B91-92B Cole Planet Jr. Seeder – One-Row Tractor Mounted:
The cradle bracket which is standard on all Planet Jr. seeders provides the float you need for accurate planting behind your tractor. Hitches are available to mount to three-point hitches: Cat. 1
Model B91-92B Cole Planet Jr. Seeder – Multi-Row; Hitches available with and without vertical adjustment to mount Planet Jr. to rear-angle frame cultivators, and to 2-1/2″ x2 1/2″ toolbars.
The Cole Planet Juniors use the B10-039X Brush Feed Wheel to Handle Your Delicate Seeds
Find enlargements of the component parts of the Cole Planet Jr. below:
|1. Floating Cradle Bracket: Designed for greater stability. When used with our hitches, the drill will not twist on the tool bar assuring accurate spacing.|
|2. Spring Loaded Dirt Scrape: Prevents dirt build-up on press wheel.|
|3. Cast Press Wheel: Has concave design for good covering. Firms the seed bed, leaving a loose zone directly over the seeds.|
|4. Floating Seed Coverer: Pulls dirt over seeds. The amount of float is adjustable.|
|5. Seed Depth: Set easily by a wing nut. No fitted tools are needed.|
|6. Automatic Seed Shut-Off on Cradle Bracket: Cuts off the seed flow when the unit is raised. Prevents wasting seeds.|
|7. Large 3″ x 15″ front wheel|
Should you wish to attach this Cole Planter to a 2 1/2 x 2 1/2 diamond toolbar, you will need these brackets: