Jang JJPDCRK Depth Control Ring Kit

Description

Jang JJPDCRK Depth Control Ring Kit

Jang JJPDCRK Depth Control Ring Kit is used with JP-1, JPH-U,  JPH-2, JPH-3, JPH-4, JP-2, JP-3, JP-6, JP-6W

Used on the post of the shoe to extend the planting depth

• These are a series of “pipes or rings” cut into two different lengths.
• When you remove the shoe from the seeder, these rings then slip over the stem of the shoe.
• The longer of the rings was designed to go on first, and this would bring your shoe to “ground level”.  After that, the rings are 1/4″ thick and can help control the depth.
• Example:  If you put the long ring on, and then 2 small rings, you should be close to 1/2″ deep.

Click Here for JP-1 Parts Diagram:

Check out our other Jang Parts:

 

• JP101 Jang Seeder Knob, Thumb Screw for the Handlebar
• JP132 Jang Seeder Cap Knob for Handlebar on JP-1 Jang Seeder
• JP53 Jang Seeder Brush for the Jang JP Series Seeder Hoppers
• JP56 Jang Seeder Knob, Thumb Screw for Chain Guard on JP Jang Seeders
• JP69 Jang Seeder Hopper Lever for JP Series Jang Seeders
• JPDSG Jang Double Seeding Guide Spout ~ Use with 24 Hole and 36 Hole Rollers
• JPSG Jang Seed Guide Spout for JP Series Jang Seeders
• Jang JJP49 Oiless Bushing
• Jang JJP57 Sprocket and Shaft for JP and JPH Garden Seeders
• Jang JJPC Standard Furrower Shoe for JP and JPH Seeders

JJP65 Chain for JP Series Jang Seeders