Wunderbar CAT I 3 Pt. Hitch and 2 x 2 Toolbar, Includes Pins

$265.00

Wunderbar CAT I 3 Pt. Hitch and 2 x 2 Toolbar, Includes Pins

Wunderbar CAT I 3 Pt. Hitch and 2 x 2 Toolbar with Pins makes it possible and easy for you to build your own Disc Hillers & Furrowers, Cultivators, Middlebusters and So Much More!

Hitch and Toolbar can be easily used in place of the Jang Hitch #HJPH for the Jang 3 Pt. Hitch Tractor Mounted Seeders as well!

Heavy Duty & Rugged!

*See More Info in Description Below:

Description

Wunderbar CAT I 3 Pt. Hitch and 2 x 2 Toolbar, Includes Pins

Wunderbar CAT I 3 Pt. Hitch and 2 x 2 Toolbar with Pins makes it possible and easy for you to build your own Disc Hillers & Furrowers, Cultivators, Middlebusters and So Much More!

Hitch and Toolbar can be easily used in place of the Jang Hitch #HJPH for the Jang 3 Pt. Hitch Tractor Mounted Seeders as well!

Heavy Duty & Rugged!

Wunderbar Cat I Hitch

Made in the USAThe Wunderbar 3 Pt. Hitches are proudly made in the USA

Wunderbar 3 Pt. Hitch I

Our North American 2 x 2 Toolbar has a 1/4″ wall and is made in Canada with Canadian Steel

Toolbar 2 x 2 x 1/4" Wall

We are putting the “Wunder” in Wunderbar!  With using a 2 x 2 Toolbar, you have the FLEXIBILITY of sliding the toolbar left or right or center.  This agility allows you to offset the toolbar if desired as well!

Wunderbar 3 Pt. Hitch and Toolbar

We call it the Wunderbar Hitch and Toolbar,–Because it’s Marvelously Wonderful!

Our Wunderbar Cat I Hitch is NOT bolted together – it is welded for strength and durability.  

Please know that this is for a CAT I Hitch.  It is not intended for CAT I Limited Hitches.

 

Wunderbar 3 Pt. Hitch and Toolbar

You can quickly add Tire Track Erasers

Tire Eraser Set with Clamps

or Gauge Wheels

Gauge Wheel Set w/ Clamps

How about a Jang JPH-U Garden SeederJPH-U Jang Seeder

Or a Jang TDR-U Garden Seeder?

TDR-U Jang 3 Pt. Hitch SeederAnd so much more!!

When you have purchased the Wunderbar CAT I 3 Pt. Hitch and 2 x 2 Toolbar, all you need to do is add a Wunderbar Set to your Hitch and Toolbar!


With Just 1 Part # Cat I 2×2 Hitch and a Toolbar, You Can Build Many Implements!

Heavy Duty – Up to 85 HP

Includes Pins

  • Cat I Hitch Pins:  Diameter .750″
  • Useable Length 2.750″
  • Overall Length 4.500″

WUNDERBAR 3 PT. HITCH DIMENSIONS:

17″ from Top Pin to Lower Pin
Upper Link is 3/4″
Lower Links are 7/8″
Pin to Pin – Center to Center –  26″-28

Spacer Bars, Toolbars & Attachments Sold Separately

Wunderbar Cat I Hitch

Wunderbar 3 Pt. Hitch

Disc Hiller Setup with Hillers, Clamps, Toolbar and Hitch

Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps

Wunderbar Module Potato Plow Bundle

Wunderbar Potato Plow Bundle

Wunderbar Potato Plow Bundle w/ Wunderbar Cat I Hitch

Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower

Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower

By using 2 “Spacer Bars” to the  Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More!

DRCB Double Row Cultivator Bundle

Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps

Wunderbar Assembly Pic

Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function

Toolbar 2 x 2 x 1/4" Wall

One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!

Tools Needed:

1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch

1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar

9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp

5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp

¾” Wrench to snug up Flat Shank Foot Pieces

(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece

9/16” Wrench to snug up the bolts to Foot Piece and Furrower

Snug up Elliptical Bolts on S-Tines  with 9/16” wrench

3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts  to fasten the S-Tine Clamps to the Toolbar

11/16” wrench to snug up the bolts on the S-Tine Clamps

David Mastin's Chisel Plow I

Wowsers! Above is a pic submitted by David Mastin of New York.

Showing our CAT I 3 Pt. Hitch, 18 Inch Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes.

David painted his toolbars John Deere Green.  Quite impressive! Thanks, Dave for Sharing!

 

Click Here for Sample Wunderbar Configurations

Wunderbar Sample Configurations

Customer writes: “I just wanted to let you know how impressed I am with your Wunderbar. I purchased the Disc Hiller & Potato Plow and they both worked GREAT. I can’t believe how sturdy everything is and your pricing can’t be beat. You can bet I’ll be back for more “toys”.” Thanks, Andy Parker

Buy a Wunderbar Bundle with the Cat I 2×2 Hitch and Toolbar – then –add a Set to your Bundle

Bundles:

#DHB Wunderbar Disc Hiller Bundle w/ Hitch, Hillers, & Clamps

#DRCB Wunderbar Double Row Cultivator Bundle w/ 9 S-Tines & Sweeps w/ Hitch & Toolbar

#PPB Wunderbar Potato Plow Bundle with 3 Pt. Hitch and Toolbar

#SRCB Wunderbar Single Row Cultivator Bundle w/4 S-Tines & Sweeps

Sets:

#DHS Wunderbar Disc Hiller Set – Without Toolbar & Hitch

#DRCS Wunderbar Double Row Cultivator Set w/ 9 S-Tines & Sweeps & 1 Toolbar-No Hitch

#PPS Wunderbar Potato Plow Set – Add to a 3 Pt. Hitch & Toolbar

#SRCS Wunderbar Single Row Cultivator Set w/4 S-Tines, Sweeps- No Hitch or Toolbar

Also, you will want to look at the Cat I 2×2 Hitch on the Undercutter

or on the Potato Planter

Additional information

Weight 80 lbs
Dimensions 31 × 30 × 20 in
Brand

Woodward Crossings

Google Product Category

MPN