Description
Wunderbar Cat I Hitch for 2 x 2 Toolbar, Includes Pins
Our Wunderbar Cat I Hitch makes it possible for you to build your own Disc Hiller & Furrower, Cultivator, Middlebuster and So Much More!
Heavy Duty & Rugged!
Made in the USA
Ships to your home via FedEx – fully assembled in a 52 lb. box!
We are putting the “Wunder” in Wunderbar! With using a 2 x 2 Toolbar, you have the FLEXIBILITY of sliding the toolbar left or right or center. This agility allows you to offset the toolbar if desired as well!
We call it the Wunderbar Cat I Hitch,–Because it’s Marvelously Wonderful!
Our Wunderbar Cat I Hitch is NOT bolted together – it is welded for strength and durability.
Please know that this is for a CAT I Hitch. It is not intended for CAT I Limited Hitches.
With Just 1 Part # Cat I 2×2 Hitch and a Toolbar, You Can Build Many Implements!
Heavy Duty – Up to 85 HP
Includes Pins
- Cat I Hitch Pins: Diameter .750″
- Useable Length 2.750″
- Overall Length 4.500″
WUNDERBAR 3 PT. HITCH DIMENSIONS:
17″ from Top Pin to Lower Pin
Upper Link is 3/4″
Lower Links are 7/8″
Pin to Pin – Center to Center – 26″-28
Spacer Bars, Toolbars & Attachments Sold Separately
Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps
Wunderbar Potato Plow Bundle w/ Wunderbar Cat I Hitch
Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower
Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower
By using 2 “Spacer Bars” to the Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More!
Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps
Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function
One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!
Tools Needed:
1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch
1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar
9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp
5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp
¾” Wrench to snug up Flat Shank Foot Pieces
(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece
9/16” Wrench to snug up the bolts to Foot Piece and Furrower
Snug up Elliptical Bolts on S-Tines with 9/16” wrench
3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar
11/16” wrench to snug up the bolts on the S-Tine Clamps
Wowsers! Above is a pic submitted by David Mastin of New York.
Showing our CAT I 3 Pt. Hitch, 18 Inch Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes.
David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!
Click Here for Sample Wunderbar Configurations
Customer writes: “I just wanted to let you know how impressed I am with your Wunderbar. I purchased the Disc Hiller & Potato Plow and they both worked GREAT. I can’t believe how sturdy everything is and your pricing can’t be beat. You can bet I’ll be back for more “toys”.” Thanks, Andy Parker
Buy a Wunderbar Bundle with the Cat I 2×2 Hitch and Toolbar – then –add a Set to your Bundle
Bundles:
#DHB Wunderbar Disc Hiller Bundle w/ Hitch, Hillers, & Clamps
#DRCB Wunderbar Double Row Cultivator Bundle w/ 9 S-Tines & Sweeps w/ Hitch & Toolbar
#PPB Wunderbar Potato Plow Bundle with 3 Pt. Hitch and Toolbar
#SRCB Wunderbar Single Row Cultivator Bundle w/4 S-Tines & Sweeps
Sets:
#DHS Wunderbar Disc Hiller Set – Without Toolbar & Hitch
#DRCS Wunderbar Double Row Cultivator Set w/ 9 S-Tines & Sweeps & 1 Toolbar-No Hitch
#PPS Wunderbar Potato Plow Set – Add to a 3 Pt. Hitch & Toolbar
#SRCS Wunderbar Single Row Cultivator Set w/4 S-Tines, Sweeps- No Hitch or Toolbar
Also, you will want to look at the Cat I 2×2 Hitch on the Undercutter
or on the Potato Planter
