Description
Wunderbar Disc Hiller Bundle Includes Toolbar and 3 Pt. Hitch
Use our Wunderbar Disc Hiller Bundle to Hill Potatoes & Build Rows to Keep Dirt Close to Crops and to Create Hills for Planting
Wunderbar Disc Hiller Bundle Includes 4 Ft. Toolbar and 3 Pt. Hitch
Woodward Crossings Calls Their Module “Wunderbar” Because it’s Marvelously Wonderful!
Our Wunderbar “Bundles” Include the 3 Pt. Hitch and Toolbar. You can then add a “Set” to the Hitch and Toolbar to create a whole other piece of equipment.
Please know that this is for a CAT I Hitch. It is not intended for CAT I Limited Hitches.
Wunderbar Disc Hiller Bundle Package Part# DHB Includes:
(1) Part# CAT I 3 Pt. Wunderbar Hitch
(1) 4 Ft. Part# HT02-04-L4 2 x 2 x 1/4″ Toolbar
Note: A 6 Ft. Toolbar Can be Ordered at Check Out, however, there is an Add’l Cost for the Length, Weight & Oversize Shipping Upcharge
(2) Part# R22Wood Disc Hiller Clamps
(2) Part# 72H31752 16″ Disc Hillers
Heavy and Rugged! Wunderbar Disc Hiller Bundle ships in 3 packages and weighs over 130#s.
Ships Fed Ex Home Delivery
Wunderbar Disc Hiller Bundle Assembly Below:
3 Pt. Hitch is 50#’s of Rugged Durability! – Up to 85 HP
Snug up Toolbar on the 3 Pt. Hitch with a 1 5/16″ Air Ratchet
Last Step:
Slide on the Disc Hiller Clamps and then Insert the Disc Hillers- Tighten Bolts.
You may also add a “Set” to the Wunderbar Disc Hiller Bundle to Build Your Own Furrower, Tire Track Eraser, Weeder Fingers, Cultivator, Middlebuster and So Much More!
Pictured Below: D. Fenton’s Hilled Garden Beds with our Hilling Package
Pictured Below: Wunderbar Disc Hiller Bundle, Submitted by Paul Brody
Pictured Below: Wunderbar Disc Hiller Bundle, Submitted by Paul Brody
Moore’s Potatoes Using Hillers. Thanks, Tom for Sharing!
Looking for a Potato Plow to plow up those lovely potatoes?
Just a Potato Plow Set to your Disc Hiller Bundle!
And, don’t forget to check out our Tire Eraser Tool to remover compressed tire tracks!
It’s All About Versatility!
With Just 1 Hitch and a Toolbar, You Can Build Many Implements!
Heavy Duty – Up to 85 HP
Includes Pins
- Cat I Hitch Pins: Diameter .750″
- Useable Length 2.750″
- Overall Length 4.500″
WUNDERBAR 3 PT. HITCH DIMENSIONS:
17″ from Top Pin to Lower Pin
Upper Link is 3/4″
Lower Links are 7/8″
Pin to Pin – Center to Center – 26″-28
Spacer Bars, Toolbars & Attachments Sold Separately
Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps
Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower
By using 2 “Spacer Bars” to the Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More!
Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps
Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function
Part #HT02-04-L4 Toolbar Sold Separately
One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!
Tools Needed:
1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch
1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar
9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp
5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp
¾” Wrench to snug up Flat Shank Foot Pieces
(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece
9/16” Wrench to snug up the bolts to Foot Piece and Furrower
Snug up Elliptical Bolts on S-Tines with 9/16” wrench
3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar
11/16” wrench to snug up the bolts on the S-Tine Clamps
Wowsers! Above is a pic submitted by David Mastin of New York.
Showing our CAT I 3 Pt. Hitch, 18″ Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes.
David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!
Buy a Wunderbar Bundle – then –add a Set to your Bundle
Bundles:
#DHB Wunderbar Disc Hiller Bundle w/ Hitch, Hillers, & Clamps
#DRCB Wunderbar Double Row Cultivator Bundle w/ 9 S-Tines & Sweeps w/ Hitch & Toolbar
#PPB Wunderbar Potato Plow Bundle with 3 Pt. Hitch and Toolbar
#SRCB Wunderbar Single Row Cultivator Bundle w/4 S-Tines & Sweeps
Sets:
#DHS Wunderbar Disc Hiller Set – Without Toolbar & Hitch
#DRCS Wunderbar Double Row Cultivator Set w/ 9 S-Tines & Sweeps & 1 Toolbar-No Hitch
#PPS Wunderbar Potato Plow Set – Add to a 3 Pt. Hitch & Toolbar
#SRCS Wunderbar Single Row Cultivator Set w/4 S-Tines, Sweeps- No Hitch or Toolbar
Our Wunderbar Module gives you the flexibility to select the components that best suits your individual 3 Pt. Hitch needs.
Consisting of Weeder Fingers, Cultivators, S-Tines, Disc Hillers, Row Hippers, Sweeps, Clamps, Bolts, Potato Plows, Middlebusters, Shanks, Spacers & more, the Wunderbar Module can be assembled to keep your garden productive!
Customer writes: “I just wanted to let you know how impressed I am with your Wunderbar. I purchased the Disc Hiller & Potato Plow and they both worked GREAT. I can’t believe how sturdy everything is and your pricing can’t be beat. You can bet I’ll be back for more “toys”. Thanks” Andy Parker
Saves Time! Saves Space! Saves Money!
“Got my packages and already put the cultivator to use! Exactly what I was looking for! Works like a charm! I had been searching for a 72″ bar for about a year. The perfect fit. Most everything is geared for 60″ or less. Should last a lifetime. Thanks so much.” D.G., Maine
