Wunderbar Double Row Cultivator Bundle w/ 9 S-Tines & Sweeps w/ Hitch & Toolbar
This Wunderbar Double Row Cultivator is a “Bundle” which comes Standard w/ the Cat I 2 x 2 Hitch & Toolbar
You can always add a “Set” to your Wunderbar Bundle and add a Potato Plow, Hillers, Tire Track Erasers, Weeder Fingers and more to your Wunderbar Hitch and Toolbar!
22″ x 1-1/4″ Standard tine. Length is 14 1/2″ from the Toolbar to Shank Bottom
S-Tines and clamps are made to demanding OEM specifications. Tines are constructed of high quality steel with rounded edges – shot peened and painted black.
Set Your Individual Spacings with the Wunderbar Double Row Cultivator
Your Part# DRCB Wunderbar Double Row Cultivator Bundle Includes:
Note: A 6 Ft. Toolbar Can be Ordered in lieu of the 4 Ft. Toolbar at Check Out, however there is an Add’l Cost for the Length, Weight & Oversize Shipping Upcharge.
- (9) Standard S-Tines, 32mm X 10mm X 560mm 14 1/2″ Bar to Shank Bottom – Part# 76A385
Note: You may upgrade to High Clearance S-Tines at Checkout
- (9) Elliptical Bolts for Sweeps – Part# 7A9080
- (9) 7 Inch Sweeps – Part# 76A383 – Other sizes available at Checkout
Note: You may change sweep sizes at Checkout
Assembly of the Wunderbar Double Row Cultivator Set below:
Start with your Wunderbar Cat I Hitch and Toolbar
Wunderbar Cat I 3 Pt. Hitch
Heavy Duty – Up to 85 HP
Add a Toolbar
Snug up Toolbar on the 3 Pt. Hitch with a 1 5/16″ Air Ratchet
Add the (2) Spacer Bars and the Extra Toolbar to Create a Double Row
Bolt on 7 Inch Sweep with Elliptical Bolts on an S-Tine
Using the Clamps, Attach the S-tines and Sweeps to the Toolbar with 7/16″ x 3″ Carriage Bolts (provided)
At Check Out, you may chose different size Sweeps
Also, at Check Out, you may chose Part# 76A389 High Clearance Tines
It’s All About Versatility!
With Just 1 Hitch and a Toolbar, You Can Build Many Implements!
Heavy Duty – Up to 85 HP
- Cat I Hitch Pins: Diameter .750″
- Useable Length 2.750″
- Overall Length 4.500″
WUNDERBAR 3 PT. HITCH DIMENSIONS:
17″ from Top Pin to Lower Pin
Upper Link is 3/4″
Lower Links are 7/8″
Pin to Pin – Center to Center – 26″-28
Spacer Bars, Toolbars & Attachments Sold Separately
Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps
Wunderbar Potato Plow Bundle w/ Wunderbar Cat I Hitch
Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower
By using 2 “Spacer Bars” to the Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More!
Wunderbar Cat I Hitch with Double Row Cultivator Set
Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps
Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function
Part #HT02-04-L4 Toolbar Sold Separately
One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!
1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch
1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar
9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp
5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp
¾” Wrench to snug up Flat Shank Foot Pieces
(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece
9/16” Wrench to snug up the bolts to Foot Piece and Furrower
Snug up Elliptical Bolts on S-Tines with 9/16” wrench
3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar
11/16” wrench to snug up the bolts on the S-Tine Clamps
Wowsers! Above is a pic submitted by David Mastin of New York.
Showing our CAT I 3 Pt. Hitch, 18″ Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes.
David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!
Buy a Wunderbar Bundle – then –add a Set to your Bundle