Wunderbar Double Row Cultivator Bundle w/ 9 S-Tines & Sweeps w/ Hitch & Toolbar
This Wunderbar Double Row Cultivator is a “Bundle” which comes Standard w/ the Cat I 2 x 2 Hitch & 4 Ft. Toolbar
You can always add a “Set” to your Wunderbar Bundle and add a Potato Plow, Hillers, Tire Track Erasers, Weeder Fingers and more to your Wunderbar Hitch and Toolbar!
22″ x 1-1/4″ Standard tine. Length is 14 1/2″ from the Toolbar to Shank Bottom
S-Tines and clamps are made to demanding OEM specifications. Tines are constructed of high quality steel with rounded edges – shot peened and painted black.
Set Your Individual Spacings with the Wunderbar Double Row Cultivator
Your Part# DRCB Wunderbar Double Row Cultivator Bundle Includes:
Note: A 6 Ft. Toolbar Can be Ordered in lieu of the 4 Ft. Toolbar at Check Out, however there is an Add’l Cost for the Length, Weight & Oversize Shipping Upcharge.
- (9) Standard S-Tines, 32mm X 10mm X 560mm 14 1/2″ Bar to Shank Bottom – Part# 76A385
Note: You may upgrade to High Clearance S-Tines at Checkout
- (9) Elliptical Bolts for Sweeps – Part# 7A9080
- (9) 7 Inch Sweeps – Part# 76A383 – Other sizes available at Checkout
Note: You may change sweep sizes at Checkout
Assembly of the Wunderbar Double Row Cultivator Set below:
Start with your Wunderbar Cat I Hitch and Toolbar
Wunderbar Cat I 3 Pt. Hitch
3 Pt. Hitch is 50#’s of Rugged Durability! – Up to 85 HP
Add a Toolbar
Snug up Toolbar on the 3 Pt. Hitch with a 1 5/16″ Air Ratchet
Add the (2) Spacer Bars and the Extra Toolbar to Create a Double Row
Bolt on 7 Inch Sweep with Elliptical Bolts on an S-Tine
Using the Clamps, Attach the S-tines and Sweeps to the Toolbar with 7/16″ x 3″ Carriage Bolts (provided)
At Check Out, you may chose different size Sweeps
Also, at Check Out, you may chose Part# 76A389 High Clearance Tines
It’s All About Versatility!
With the Wunderbar Hitch and Toolbar, You Can Build Many Implements!
Heavy Duty – Up to 85 HP
- Cat I Hitch Pins: Diameter .750″
- Useable Length 2.750″
- Overall Length 4.500″
WUNDERBAR 3 PT. HITCH DIMENSIONS:
17″ from Top Pin to Lower Pin
Upper Link is 3/4″
Lower Links are 7/8″
Pin to Pin – Center to Center – 26″-28
Spacer Bars, Toolbars & Attachments Sold Separately
Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps
Wunderbar Potato Plow Bundle w/ Wunderbar Cat I Hitch
Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower
By using 2 “Spacer Bars” to the Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More!
Wunderbar Cat I Hitch with Double Row Cultivator Set
Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps
Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function
Part #HT02-04-L4 Toolbar Sold Separately
One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!
1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch
1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar
9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp
5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp
¾” Wrench to snug up Flat Shank Foot Pieces
(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece
9/16” Wrench to snug up the bolts to Foot Piece and Furrower
Snug up Elliptical Bolts on S-Tines with 9/16” wrench
3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar
11/16” wrench to snug up the bolts on the S-Tine Clamps
Wowsers! Above is a pic submitted by David Mastin of New York.
Showing our CAT I 3 Pt. Hitch, 18″ Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes.
David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!
Buy a Wunderbar Bundle – then –add a Set to your Bundle
Our Wunderbar Module gives you the flexibility to select the components that best suits your individual 3 Pt. Hitch needs.
Consisting of Weeder Fingers, Cultivators, S-Tines, Disc Hillers, Row Hippers, Sweeps, Clamps, Bolts, Potato Plows, Middlebusters, Shanks, Spacers & more, the Wunderbar Module can be assembled to keep your garden productive!
Customer writes: “I just wanted to let you know how impressed I am with your Wunderbar. I purchased the Disc Hiller & Potato Plow and they both worked GREAT. I can’t believe how sturdy everything is and your pricing can’t be beat. You can bet I’ll be back for more “toys”. Thanks” Andy Parker
Saves Time! Saves Space! Saves Money!
“Got my packages and already put the cultivator to use! Exactly what I was looking for! Works like a charm! I had been searching for a 72″ bar for about a year. The perfect fit. Most everything is geared for 60″ or less. Should last a lifetime. Thanks so much.” D.G., Maine