Wunderbar Potato Plow Bundle with 3 Pt. Hitch and Toolbar
We Call it Wunderbar -Because it’s Marvelously Wonderful!
Your Potato Plow Bundle Package Includes:
(1) Part# CAT I 2×2 3 Pt. Wunderbar Hitch
(1) 4 Ft. Part#HT02-04-L4 2 x 2 x 1/4″ Toolbar
(1) Part#S22Wood Flat Shank Clamp
(1) Part# FS58-2 Flat Shank with Footpiece
(1) Part# 53A103 12″ Furrower
Wunderbar Potato Plow Assembly Below:
Attach a Toolbar to the Cat I Hitch
Snug up Toolbar on the 3 Pt. Hitch with a 1 5/16″ Air Ratchet
Slide on the Flat Shank Clamp and then Insert the Flat Shank- Tighten Bolts.
Bolt on Furrower with 3″ Carriage Bolts, Nuts and Washers
Adding a “Set” to the Wunderbar Hitch and Toolbar, You Can Create Your Own Cultivator, Tire Track Eraser, Weeder Fingers, Furrower and So Much More!
Looking for an All-In-One Potato Furrower, Potato Hiller and Potato Planter? Check out our Wunderbar Potato Planter!
With Just 1 Hitch and a Toolbar, You Can Build Many Implements!
Heavy Duty – Up to 85 HP
- Cat I Hitch Pins: Diameter .750″
- Useable Length 2.750″
- Overall Length 4.500″
WUNDERBAR 3 PT. HITCH DIMENSIONS:
17″ from Top Pin to Lower Pin
Upper Link is 3/4″
Lower Links are 7/8″
Pin to Pin – Center to Center – 26″-28
Spacer Bars, Toolbars & Attachments Sold Separately
Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps
Wunderbar Potato Plow Bundle w/ Wunderbar Cat I Hitch
Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower
By using 2 “Spacer Bars” to the Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More!
Wunderbar Cat I Hitch with Double Row Cultivator Set
Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps
Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function
Part #HT02-04-L4 Toolbar Sold Separately
One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!
1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch
1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar
9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp
5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp
¾” Wrench to snug up Flat Shank Foot Pieces
(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece
9/16” Wrench to snug up the bolts to Foot Piece and Furrower
Snug up Elliptical Bolts on S-Tines with 9/16” wrench
3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar
11/16” wrench to snug up the bolts on the S-Tine Clamps
Wowsers! Above is a pic submitted by David Mastin of New York.
Showing our CAT I 3 Pt. Hitch, 18″ Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes.
David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!
Buy a Wunderbar Bundle – then –add a Set to your Bundle