Wunderbar Potato Plow Set – Add to a 3 Pt. Hitch & Toolbar


Wunderbar Potato Plow Set – Add to a 3 Pt. Hitch & Toolbar

Wunderbar Potato Plow Set – Add to Part# Cat I 2×2 Hitch and Part# HT02-04-L4  Toolbar to Create Furrows or Dig Potatoes

 *See More Info in Description Below:

In stock


Wunderbar Potato Plow Set – Add to a 3 Pt. Hitch & Toolbar

Wunderbar Potato Plow Set – Add to Part# Cat I 2×2 Hitch and Part# HT02-04-L4  Toolbar to Create Furrows or Dig Potatoes

We Call it Wunderbar -Because it’s Marvelously Wonderful!

Our Wunderbar Potato Plow is intended for use in well-rototilled garden soil.

Our Wunderbar “Set” is used with the 3 Pt. Hitch and Toolbar (Both Sold Separately). 

Your Potato Plow Bundle Package Includes:

(1) Part# S22Wood Flat Shank Clamp

(1) Part# FS58-2 Flat Shank with Footpiece

(1) Part# RCSH Row Crop Sweep Hardware

(1) Part# Furrower

Wunderbar Potato Plow Set

Row Crop Sweep Hardware


Check out our other Wunderbar Sets:

Wunderbar Potato Plow Assembly Below:

Wunderbar Cat I 3 Pt. Hitch

Attach a Toolbar to the Cat I Hitch (Both Sold Separately)

Wunderbar Cat I Hitch for a 2 x 2 Toolbar

Snug up Toolbar on the 3 Pt. Hitch with a 1 5/16″ Air Ratchet

Wunderbar Module Potato Plow Bundle

Potato Plow Bundle – Wunderbar 3 Pt. Hitch with Toolbar and Potato Plow Set

Slide on the Flat Shank Clamp and then Insert the Flat Shank- Tighten Bolts.

PPB Potato Plow Bundle

Bolt on Furrower with 3″ Carriage Bolts, Nuts and Washers

Our Wunderbar “Sets”  can be added to the Hitch and Toolbar to create a whole other piece of equipment such as a Cultivator, Tire Track Eraser, Weeder Fingers,  Furrower and So Much More!

With Just 1 Hitch and a Toolbar, You Can Build Many Implements!

Heavy Duty – Up to 85 HP

Includes Pins

  • Cat I Hitch Pins: Diameter .750″
  • Useable Length 2.750″
  • Overall Length 4.500″


17″ from Top Pin to Lower Pin
Upper Link is 3/4″
Lower Links are 7/8″
Pin to Pin – Center to Center – 26″-28

Spacer Bars, Toolbars & Attachments Sold Separately

Wunderbar Cat I Hitch

Wunderbar 3 Pt. Hitch


Disc Hiller Setup with Hillers, Clamps, Toolbar and Hitch

Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps

Wunderbar Potato Plow Bundle

Wunderbar Potato Plow Bundle w/ Wunderbar Cat I Hitch

Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower

By using 2 “Spacer Bars” to the Wunderbar Cat I Hitch and Adding an Additional Toolbar, You Can Make Your Own 2-Row Cultivator and More!

DRCB Double Row Cultivator Bundle

Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps

Wunderbar Assembly Pic

Our Wunderbar Cat I Hitch is Recommended for Use with our Components or Components that a Similar in Size and Function

Toolbar 2 x 2 x 1/4" Wall

Part #HT02-04-L4 Toolbar Sold Separately

One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!

Tools Needed:

1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch

1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar

9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp

5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp

¾” Wrench to snug up Flat Shank Foot Pieces

(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece

9/16” Wrench to snug up the bolts to Foot Piece and Furrower

Snug up Elliptical Bolts on S-Tines with 9/16” wrench

3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar

11/16” wrench to snug up the bolts on the S-Tine Clamps

David Mastin's Chisel Plow I

Wowsers! Above is a pic submitted by David Mastin of New York.

Showing our CAT I 3 Pt. Hitch, 18″ Spacers, 6 Ft. Toolbars, our 5/8″ Shanks, and Straight Chisel Spikes.

David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!

Buy a Wunderbar Bundle – then –add a Set to your Bundle


#DHB Wunderbar Disc Hiller Bundle w/ Hitch, Hillers, & Clamps

#DRCB Wunderbar Double Row Cultivator Bundle w/ 9 S-Tines & Sweeps w/ Hitch & Toolbar

#PPB Wunderbar Potato Plow Bundle with 3 Pt. Hitch and Toolbar

#SRCB Wunderbar Single Row Cultivator Bundle w/4 S-Tines & Sweeps


#DHS Wunderbar Disc Hiller Set – Without Toolbar & Hitch

#DRCS Wunderbar Double Row Cultivator Set w/ 9 S-Tines & Sweeps & 1 Toolbar-No Hitch

#PPS Wunderbar Potato Plow Set – Add to a 3 Pt. Hitch & Toolbar

#SRCS Wunderbar Single Row Cultivator Set w/4 S-Tines, Sweeps- No Hitch or Toolbar

Our Wunderbar Module gives you the flexibility to select the components that best suits your individual 3 Pt. Hitch needs.

Consisting of Weeder Fingers, Cultivators, S-Tines, Disc Hillers, Row Hippers, Sweeps, Clamps, Bolts, Potato Plows, Middlebusters, Shanks, Spacers & more, the Wunderbar Module can be assembled to keep your garden productive!

Customer writes: “I just wanted to let you know how impressed I am with your Wunderbar. I purchased the Disc Hiller & Potato Plow and they both worked GREAT. I can’t believe how sturdy everything is and your pricing can’t be beat. You can bet I’ll be back for more “toys”. Thanks” Andy Parker

Saves Time! Saves Space! Saves Money!

“Got my packages and already put the cultivator to use!  Exactly what I was looking for!  Works like a charm!  I had been searching for a 72″ bar for about a year.  The perfect fit.  Most everything is geared for 60″ or less.  Should last a lifetime.  Thanks so much.” D.G., Maine

Additional information

Weight 45 lbs
Dimensions 30 × 20 × 20 in

Woodward Crossings


Google Product Category